The RPI4 is currently the most powerful RPI available. When boot from USB is possible, that will be recommended. Otherwise you will exhaust the amount of writes available to the flash on the sd card. It's recommended you use an external HDD for the RPI to record videos from ZM. How else will programmers have a job if they don't break things that work?ĭefault ZM RPI4 Install, sits at 190M RAM, Load averages 0.01, 0.21, 0.41 Note that this is subject to change due to devs endlessly reinventing the wheel. Instead, you have to uninstall netplan.io and install the ifupdown package. Note that this doesn't work on ubuntu because netplan is the new networking package. if you have a hidden SSID, you have to add scan_ssid=1 to the network section. If you have an unusual wifi setup then you may need additional parameters. That's all that is needed for a basic wifi setup (with ifupdown package). In /etc/wpa_supplicant/wpa_nf put:Ĭtrl_interface=/var/run/wpa_supplicant GROUP=netdev If you need wifi do something like the following: The following was mentioned in the forums as helping (unverified) Optional Tweaks apt-get remove avahi-daemon #security risk, not needed for basic setupsĪpt-get remove bluez alsa-utils (not needed) Defines the default timezone used by the date functions Search for (Ctrl + w then type Date and press Enter) and make changes as Note that if zm fails to start, and you have changed the mysql user/password, be sure to edit /etc/zm/zm.conf with the new user/password Sudo chown -R www-data:www-data /var/cache/zoneminder/ Sudo mysql -uroot -p -e "grant all on zm.* to identified by 'zmpass' " Sudo mysql -uroot -p < /usr/share/zoneminder/db/zm_create.sqlĮdit the following user / pass as necessary Install and Configure Zoneminder sudo apt install zoneminder vlc-plugin-base Sudo apt install php libapache2-mod-php php-mysql Install LAMP sudo apt-get install apache2 mariadb-server 1.32 and 1.34 is a stable release (1.33 and 1.35 is development). If you want to use more up to date editions of Zoneminder, see Debian. Debian - Most up to date installation docs for 1.34 can be found here.īut instead of deb multimedia use raspbians 1.32.3 image.However, i had a hdmi to hdmi micro cable and that worked. When booting RPI4, i tried an hdmi cable to hdmi to hdmi micro adapter, but it didn't work - the monitor kept shutting off. See Single_Board_Computers#GPU_Memory for a possible performance boost. Alternatively, you can try the JPEG saving, but it will be less efficient. Passthrough has less CPU usage than H264 encoding or the JPEG saving. ZM 1.32 on ARM has a bug where by default it's set to use the H264 encoding. 1.33/1.34 will be available at ZMRepo at some point. 1.32.3 has support for H264 passthrough and JPEG recording only. If you need H264 Encoding, 1.33 / 1.34 will have that as an option. In Debian and Ubuntu resizing the SD card filesystem is a manual step. Some things are more streamlined, such as the SD Card auto resizing upon dd'ing the Raspbian image. Raspbian might have better performance than Ubuntu or Debian RPI images due to fixes tailored for the RPI. (Options - Logs) if you are using an SSD or SD card.Ī guide to putting the rootfs on an external usb drive, is here: Also disable logging on ZM after you get it working. I would recommend to set the RPI4 to boot from external USB HDD or at least an external for all the video and picture storage of ZM. This guide will also likely work on other RPIs that use Buster. the RPI4 requires Buster, so Stretch isn't an option. The Raspberry Pi 4 has been tested with ZM 1.32.3 and Buster. Note: For a full listing of RPI/ARM based install docs see Single Board Computers
0 Comments
Leave a Reply. |